Brief introduction to the configuration and process composition of fish food machine
Now fish food machine can produce different fish food, which can be made into various shapes and forms. Next, this article will briefly introduce the configuration and process composition of fish food machine.
Configuration of fish food machinery
Generally speaking, according to the output of the fish food pellet unit, the output of the pellet unit we choose is also different. Its configuration is probably as follows: hammer feed mill + air blower + screw elevator + silo to be mixed + horizontal single-shaft feed mixer + silo to be pelleted + feed pellet machine + bucket elevator + counter-flow cooler + vibrating screen + automatic baler + electric control cabinet
The composition of fish food machinery
1.Ultrafine pulverizer - pulverizes various raw materials, and the general pulverization capacity is controlled at about 400-1200kg/h,
2. Raw material receiving storage tank - equipped according to the amount of raw materials
3. Discharge system - output from storage tank to mixer. Wearing an automatic weighing system to accurately output various raw materials according to a certain proportion
4. Vertical mixer – fully mixes various raw materials, and can stir 300-500kg/h at a time
5. Screw conveyor: use the motor as power for screw conveying, and transport the mixed raw materials to the feeding hopper of the extruder to ensure convenient and fast feeding
6. The storage bucket has a transition system for the mixed raw materials, which is suitable for large fish food processing production lines
7. Screw Feeder
8. Feeding machine – supplying raw materials at a uniform speed, the equipment is driven by a mechanic to run stably, and there is no card group leftover phenomenon.
9. Double rod differential pre-conditioner – pre-conditioner can prolong the modulation time of raw materials in the mixer by 3-5 times
10. Twin-screw extruder: In the high temperature and high pressure environment, under the condition of screw extrusion, different feeds can be produced by adjusting the process, and the specific particle size and shape can be replaced by molds.
11. Vibrating screen – the steam of the raw material is dissipated, and the dander on the surface of the particles is collected and reused
12. Air blower
13. Auto belt dryer: The oven is mostly a steam oven, the temperature is adjusted between 0-100 degrees through the control cabinet, and the interior is a stainless steel double-layer mesh belt, which reduces the moisture of the feed particles, promote ripening rate and increase shelf life. The machine is hot air circulation, and the drying capacity is extremely strong. The dehydration rate is 120-250kg/h.
14. Seasoning line: The oil sprayer sprays oil and food attractants, etc. The seasoning drum includes octagonal drum, cylinder, single-drum seasoning line, and double-drum seasoning line. According to the configuration of output and product properties, the oil is sprayed on the surface of the feed, and at the same time Spray with minced meat and spices and spread evenly.
15. Cooling conveyer: reduce the temperature of fish food, promote the solidification of oil, reduce the temperature of particles, and facilitate packaging.
16. Vibrating screen: sieve out excess external material and particle crushing dust, ensure the quality and ensure the reuse of raw materials
17. Z-type elevator – conveying the raw materials in a straight line, with a small footprint
18. Distributor, distributes raw materials to multiple storage buckets
19. Automatic output system, finished raw materials are output
20. Packaging machine – according to the size of the packaging specifications, there are different types of packaging machines. The packaging models are 2kg/5kg/10kg/15kg/20kg/25kg.
